3
Innosilicon After sales Team
Email:[email protected]
2.2 Assemble&Operate
Connect the miner and the router by the Ethernet cable, then the miner can start to run after
power on the miner.
Normal Led
：
Solid means static IP; Blinking means DHCP
Fault Led
：
On means network has something wrong; Off means OK.
IP SET button
:
Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to
Static IP mode and modify the IP to the IP range you set in the “Set IP” tool
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore
to default.
Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
RESET button:
Your miner will restart if you press it..
AC Cable port
Switch
Ethernet port
