2
Innosilicon After sales Team
Email:[email protected]
2. Assemble the miner
2.1 Check the miner before power on
Check the warranty sticker is well or not, especially the hashboards
PSU port side. If the warranty sticker is damaged when you received the
miner, please contact our After-sales.
Before you power on the miner, shake the miner softly, if you can hear
the sound of metal banging on metal, please contact our After-sales.
Check if the fan work well, if you find the fans broken please contact
our After-sales.
The cable connection should be same as the follow picture.
Note:
There is a led on each hashboard, which can show the work status of the hashbaord.
When the miner start to work, the led
Solid---workig well
Blink---the hashboard overheat, please check the fans of the miner and the room temp
Off---the hashboard don’t work, please try to reboot the miner or change the data cable. You
can contact our after-sales team if the problem is still exist.
