Document name: Link IO - Manual
Document date: 1.2 10/02/2020
33
Restore factory defaults
From the general settings menu it is possible to restore the Link IO device to the factory settings, by
changing the setting from “NO” to “YES” and press Enter
There are special cases where the device might not be accessible (
“
setting log in password
”
lost is probably
the main example).
In this case, it is possible to access a “system hidden menu”, by holding both the buttons
and
pressed until the menu appears (about 4 seconds)
Move to the option “Application”
using the
buttons and press
.
The “Application” sub menu appears
From there, move to the option “Wipe Retain”
using the
buttons.
Once you press
, the factory default settings will be applied, also resetting the forgotten setting log in
password to
“1234”.
