Document name: Link IO - Manual
Document date: 1.2 10/02/2020
12
Configuration password, log in/log out
When trying to access any configuration setting without being logged in, the password screen is displayed
automatically as follow
Use the
up and down buttons to increase/decrease each digit value and press
enter to move to
the next digit and confirm the value.
The default password is 1234
.
The password can be changed from the “General settings” menu.
If the wrong password is inserted, the setting is blanked, and you can try again.
You can exit this screen by pressing
back.
If the correct password is inserted, you will be logged in and you will be able to enter any configuration
menu.
You can log out at any time by holding the button
back for 5 seconds, until the display goes back to the
main screen.
If you do not press any button for more than 5 minutes, the system will automatically log you out and switch
off the screen backlight (away mode). The screen backlight switches back on by pressing any button.
