InnoMedia MTA8328 Administrative Guide
Page 66
Copyright © 2020 InnoMedia. All rights reserved.
A
PPENDIX
C:
W
I
F
I
C
ONNECTION
S
ETUP THROUGH
C
APTIVE
P
ORTAL
Connect the MTA to the Home Router through a WiFi connection. You will connect the MTA to a WiFi Access
Point using your smartphone, tablet or PC. Press the round button on the top of the unit for about 5 seconds,
the MTA will switch to “Setup Mode” and the WiFi LED will change to
solid yellow. Connect your smartphone
or PC to t
he MTA’s preset SSID shown on the back of the unit, i.e., MTA8328
-xxxxxx, product name followed
by the last 6 digits of MAC address. The MTA welcome portal web page will show up on your smartphone/PC.
If this page does not popup, open a web browser and type in the following address:
http://192.168.199.1/wifisetup/
WiFi setup steps are as on the following screens:
(1)
Welcome page
Figure 55. Captive Portal - Welcome
(2)
Select a Wireless SSID from the list, or just type the SSID name in the input box if the SSID name is
hidden.
Figure 56. Captive Portal
–
SSID selection
