InnoMedia MTA8328 Administrative Guide
Page 56
Copyright © 2020 InnoMedia. All rights reserved.
Field Name
Description
Current Date
The current date, which can be modified.
Current Time
The current time, which can be modified.
Time Zone
The current Time Zone configured, which
can be modified through the pull down list.
Note a reboot is needed for this setting to
become effective.
Enable DST
Enable or disable daylight saving time.
DST Start Month |
Week | WeekDay
|Time
Configure the DST starting date/time each
year.
DST End Month |
Week | WeekDay
|Time
Configure the DST ending date/time each
year.
DST Offset
Most of the regions where DST is deployed
have an offset of 60 minutes; however, a
few regions have an offset of 30 minutes.
Check the MTA deployment region for this
requirement.
Enable SNTP
Enable the SNTP service.
Retry Interval
The time interval at which to synchronize
with the time server, in seconds.
SNTP Server #1, #2,
and #3
FQDN or IP of SNTP time servers to
synchronize with.
(Note: MTA8328 tries all the configured
servers, and bases its calculation on RFC
2030 and the delay. It then uses the lowest
delay as the peer updates and sets the local
time.)
5.10
Language
The MTA device supports English, Spanish for Interactive Voice Response (IVR) services. Select the desired
language for your needs.
Figure 49. Language Selection for IVR system
