InnoMedia iPBX-400 Administrative Manual Download

Page: 98 / 104

December 2008 - InnoMedia

InnoMedia iPBX Administrative Guide

7.6

VLAN

This advanced feature is only recommended if your network consists of VLAN-enabled servers and

components. If you are unsure whether your network is using VLAN, leave it disabled on your SIP Devices.

7.6.1

Accessing VLAN Configuration Screen

Click the

icon on the navigation bar.

Click VLAN under the Settings menu in the left panel. The VLAN screen appears (see Figure )

Field

Description

Enable Ping to WAN
Interface

Enable or disable Internet remote user to Ping this host's WAN interface.

Enable access to Web

Admin via WAN

interface

Allow remote users to use browser to access user self care pages via WAN

interface. If enabled, you need to set up the open port. The default is 8080.

Forbid administrator to

access to Web Admin

via WAN interface

Allow administrator to to access the administrator Web page via WAN

interface.

MTU

Maximum transfer unit, must be greater than 536, and the default is 1492.

MTU setting will affect the system performance, and it's recommended to use

the default value.

Restore Default

Restore this page setting to the factory default.

Summary of Contents for iPBX-400






































































































Search results

Summary of Contents for iPBX-400

Reviews:

Related manuals for iPBX-400

Brands by name

Popular brands

InnoMedia iPBX-400, Administrative Manual

Search results

Summary of Contents for iPBX-400

Reviews:

Related manuals for iPBX-400

Brands by name

Popular brands