27
December 2008 - InnoMedia
© 2001 InnoMedia. All rights reserved.
InnoMedia iPBX Administrative Guide
Figure 4.4 Adding Devices Manually
4.3
Adding any unmanaged SIP Phones to iPBX Service Domain
In certain circumstances, you might have some 3
rd
party SIP Phones that does not pass the iPBX
certifications but you need to have them register to iPBX. Theoretically by following standard SIP
standard, some basic call features can be done with standard SIP implementation. However, the advanced
call features including 3-way calls, auto-discovery, provisioning and management features will not be
available to those IP Phones which do not exist in the table at ‘device provisioning’ page <System
Provisioning
Device Provisioning>.
To assign these unmanaged SIP Phones to users and register to iPBX, you need to process the following
steps:
1.
Go to the page at “Telephony
Settings
Ext. IP Phones”, and click on any record that you want
to configure.
2.
Choose the item ‘Unmanaged Device’ at the Device Model field, and click <Action
> button.
3.
Click on the < Extension Setting
> button, and get into to “General Setting” page. Delete the
contents in the “SIP Auth password” field.
4.
You need to manually configure your IP Phone device, according to the user’s guide of that
specific IP Phone device in order to register to iPBX for telephony services.
