InnoMedia HG8328-1W Administrative Guide
Page 57
Copyright © 2019 InnoMedia. All rights reserved.
6
CLI
C
OMMAND REFERENCES
Only the Administrator user is allowed to access the HG CLI console. The login ID and password are identical
to those for WEB console login. The CLI command hierarchy is designed similarly to that of the WEB console.
Once logged in successfully, the command menu is displayed.
[v]voip VoIP Configuration
[n]net Network Configuration
[s]system System
[f]factory Factory
[d]restore Restore to Default Setting
Type the char enclosed in the square bracket [] to enter that particular section.
Type question mark “?” at any level to display available commands.
Type “
cd ..”
to go back to the upper level.
[f] factory sub-menu is password protected.
Type command “save” or “write” whenever the MTA configurations being updated through CLI
commands.
Under any level, to show debug messages on the CLI console, type “debug on”; to stop debug messages
being displayed, simply type “debug off”.
