Deploying BT200 for Voice-Enabled Workplace
Page
5 of 35
2
P
REREQUISITES
Please check the following prerequisites before proceeding to deploy BT200 devices in your
workplace:
AWS Account
Your enterprise needs to have an AWS account. If not, please follow the AWS instructions and
procedure to sign up for AWS and create IAM users and policies.
VoIP Service
Your enterprise needs to have a VoIP service subscription for the BT200 devices. The VoIP
service can be one of the two types:
Your enterprise is already using a VoIP service for your IPPBX system. In such a case,
the BT200 devices can be configured as IP phones connected to the existing IPPBX
system
.
our enterprise does not have an IPPBX system, or you would like to setup the BT200
devices with a separate VoIP service even if your enterprise already has an IPPBX
system. In such a case, you will configure the BT200 devices with the external VoIP
service parameters
.
With either one of the above approaches, prepare the following items:
Admin user ID and password of
each
BT200 device for accessing the BT200
management console.
SIP account of each BT200 device. This may include
o
SIP account (or IPPBX extension number)
o
SIP account password, and optionally authentication ID
SIP server (IPPBX) registration information
o
Server IP address (or FQDN)
o
SIP domain
o
Other requirements for SIP registration depending on Server (or IPPBX)
settings
Site Survey
What is the calendar system used at your workplace?
What is the conference service used at your workplace?
Enterprise Firewall
The BT200 will be communicating with external services through the following ports. Please
configure your enterprise firewall accordingly
.
