37
InnoMedia, Inc
.
All Right Reserved
DSCP for signal: 160,0xa0
DSCP for voice: 65535,0xffff
DSCP for other: 65535,0xffff
DSCP for LAN traffic: 65535,0xffff
Prov_Server_Name: 12.22.51.56
DHCP Check Option 43 disable
Ether Address = 00:10:99:01:ac:34;
You are using DHCP.
Local IP = 172.16.0.199;
Local IP Mask = 255.255.0.0;
Local Default GW IP = 172.16.0.1;
Local Default GW Mask = 255.255.0.0;
Primary Domain Name Server = 172.16.0.2;
Secondary Domain Name Server = 192.168.0.2;
Configuring IP Information (Ci)
The "
Ci
" command is used to configure the IP information such as IP address, default
Gateway IP address, DNS server IP address or call agent IP address. In addition, you may
modify other host settings as described later in this document. Reboot the SIP Device
when you finish the configuration.
SAMPLE:
Ci
1. Configure Local IP
2. Set DNS IP(s)
3. SIP Proxy Server And SIP Domain
4. Change IP Settings for All
5. Configure other Local Host settings
6. Configure Provisioning Server(obsolete)
7. Configure MTU Size
9. Configure MTA Web Server Port
Configuring Local IP (Ci, 1)
Select Option 1 to modify the current IP address information for the SIP Device. If you
plan to use DHCP, answer Y when prompted. You must reboot in order for changes to
take effect.
Using DHCP
SAMPLE:
Ci
1. Configure Local IP
2. Set DNS IP(s)
3. SIP Proxy Server And SIP Domain
4. Change IP Settings for All
5. Configure other Local Host settings
