11
InnoMedia, Inc
.
All Right Reserved
Figure 8. Configuring Provisioning Settings
Configuring SNMP Settings
To use a SNMP Manager to monitor your SIP Device, configure the SIP Device SNMP
setting. Follow these steps for configuration of SNMP Settings:
Table 6. Configuring SNMP Setting
Step Action
1
Open your web browser and connect to your SIP Device.
2
Click on IP Network, then SNMP Setting.
3
Enter the SNMP Manager Address where the SNMP software is
installed.
4
Enter the SNMP Community Name #1. It must match the string
configured on your SNMP server. By default, SNMP community
#1 is read-only community string for SNMP Get- request.
5
Enter in the SNMP Community Name #2. It must match the string
configured on your SNMP server. By default, SNMP community
#2 is read-write community string for SNMP Set-request.
6
Click Save & Reboot to save your changes and take into effect, or
click the Reset button to undo your changes.
