Inmes FF-325 PLUS, Operation Manual

Page: 17 / 62

INMES Industrial Ltda – Sliding table saw FF-325 Plus 15
4.4.4 Stop installation (Pic. 4.4.4)
- Place the stop pin A in the socket on the cross table
and mount the knob B to the pin.
- Attach knob C that secures the stop angle
adjustment.
- Handle D is designed for perpendicular micro
adjustment between the stop and the blade.
(Pic. 4.4.4)
4.4.5 Ruler guide installation (Pic. 4.4.5)
Tools required for assembly:
- Wrench 24mm.
- Allen wrench 5mm.
- Install ruler B on the fixed table with screw 1.
- Install scale A on scale B socket.
- Install screw6 in guide C, then mount guide to
tables with parts 2, 3, 4, 5.
(Pic. 4.4.5)
4.4.6 Ruler Installation (Pic. 4.4.6)
- Install the ruler bracket A to guide B as shown.
- Install screw C to ruler guide B.
- Install ruler D to bracket fitting A.
(Pic. 4.4.6)