EDAM-4200 Series User’s manual Version 1.03
♦
Delphi:
(see TCPDAQ.pas)
Function UDP_ModuleDisconnect (szIP: PChar): Longint; StdCall;
♦
VC++:
(see TCPDAQ.h)
int UDP_ModuleDisconnect(char szIP[]);
Parameters:
szIP[in] : the IP address for an EDAM-4200 that to be disconnected
Return Code:
refer to the
Error code
.
7.5.12
UDP_SendData
Description:
send data to a specific EDAM-4200 module (Datagram)
Syntax:
♦
Visual Basic:
(see TCPDAQ.bas)
Declare Function UDP_SendData Lib "TCPDAQ.dll" Alias "_UDP_SendData@12"
(ByVal szIP As String, ByRef pData As Byte, ByVal wDataLen As Integer) As Long
♦
Borland C++ Builder:
(see TCPDAQ.h)
int UDP_SendData(char szIP[],char *pData,u_short wDataLen);
♦
Delphi:
(see TCPDAQ.pas)
Function UDP_SendData (szIP: PChar; pData: PByte; wDataLen: Integer): Longint; StdCall;
♦
VC++:
(see TCPDAQ.h)
int UDP_SendData(char szIP[],char *pData,u_short wDataLen);
Parameters:
szIP[in]
: the IP address for an EDAM-4200 that to be connected
pData[in]
: points to data buffer
wDataLen[in]
: length of data be sent
Return Code:
refer to the
Error code
.
7.5.13
UDP_RecvData
Description:
receive data to a specific EDAM-4200 module (Datagram)
Syntax:
♦
Visual Basic:
(see TCPDAQ.bas)
Declare Function UDP_RecvData Lib "TCPDAQ.dll" Alias "_UDP_RecvData@12"
(ByVal szIP As String, ByRef pData As Byte, ByVal wDataLen As Integer) As Long
♦
Borland C++ Builder:
(see TCPDAQ.h)
int UDP_RecvData(char szIP[],char *pData,u_short wDataLen);
♦
Delphi:
(see TCPDAQ.pas)
Function UDP_RecvData (szIP: PChar; pData: PByte; wDataLen: Integer): Longint; StdCall;
♦
VC++:
(see TCPDAQ.h)
int UDP_RecvData(char szIP[],char *pData,u_short wDataLen);
Parameters:
szIP[in]
: the IP address for an EDAM-4200 that to be connected
pData[out]
: 8 bit array that stored the received data
wDataLen [in] : length of received data
Return Code:
refer to the
Error code
.
7.5.14
UDP_SendReceiveASCcmd
Description:
send an ASCII format string as a command to EDAM-4200 and receiving the response
from EDAM-4200.
Syntax:
Printed Date: 27 February 2018
68