EDAM-4200 Series User’s manual Version 1.03
7.3
Digital I/O Functions
7.4
MODBUS/TCP Functions
TCP_MODBUS_ReadCoil
To read the coil values at a specific range described in
parameters
TCP_MODBUS_WriteCoil
To write the coil values at a specific range described in
parameters.
TCP_MODBUS_ReadReg
To read the holding register value at a specific range described
in parameters
TCP_MODBUS_WriteReg
To write values to the holding registers at a specific range
described in parameters
TCP_ReadDIOMode
To read the type for every D/I & D/O channels of an
EDAM-4200(A) module
TCP_ReadDIO
To read DI/DO's status for an EDAM-4200(A) module
TCP_ReadDISignalWidth
To read the minimal high/low signal width of each D/I channel for
an EDAM-4200(A) module
TCP_WriteDISignalWidth
To set the minimal high/low signal width of each D/I channel for
an EDAM-4200(A) module
TCP_ReadDICounter
To read the counter value when a D/I channel function in
'Counter' mode
TCP_ClearDICounter
To clear the counter value when a D/I channel function in
'Counter' mode
TCP_StartDICounter
To start the counting when a D/I channel function in 'Counter'
mode
TCP_StopDICounter
To stop the counting when a D/I channel function in 'Counter'
mode
TCP_ClearDILatch
To clear the latch when a D/I channel function as 'Lo to Hi Latch'
or 'Hi to Lo Latch'
TCP_ReadDILatch
To read the counter value when a D/I channel function in
'Counter' mode
TCP_WriteDO
To write some value to D/O channels for an EDAM-4200(A)
module
TCP_WriteDOPulseCount
To write the pulse output count for EDAM-4200(A) DIO modules
during runtime
TCP_WriteDODelayWidth
To set the pulse and delay signal widths to the specific
EDAM-4200(A) DIO modules
TCP_ReadDODelayWidth
To read the pulse and delay signal width from the specific
EDAM-4200(A) DIO modules
Printed Date: 27 February 2018
63