Inlog EDAM-4200 Series, User Manual, Page: 60 / 170

EDAM-4200 Series User’s manual Version 1.03
6.7 Properties of TCPDAQ ActiveX Control
Name Type Description Avaliable Model(s)
AOValue double Set the analog output voltage All models
ASCIICommandReceive string Return the ASCII response message
from module
All models
ASCIICommandSend string Send the ASII command message to
module
All models
DIChannelIndex short Specifies the digital input channel to
perform other DI properties read/write
operation.
All DIO models
DIounterValue long Return the counting value for the
specific DI channel which functions in
“Count/Frequency mode”
All DIO models
DILatchStatus short Return the latch status for the specific
DI channel which functions in
“Lo-Hi/Hi-Lo latch mode” (1=Latched,
0=No latched)
All DIO models
DIStartCount boolean Start/stop counting for the specific DI
channel which functions in
“Count/Frequency mode” (True=Start,
0=Stop)
All DIO models
DIStatus short Return the status for the specific DI
channel which functions in “DI mode”
(1=Active, 0=Inactive)
All DIO models
DOChannelIndex short Specifies the digital output channel to
perform other DO properties
read/write operation.
All DIO models
DOCount long Set the output count value for the
specific DO channel which functions in
“Pulse output mode”
All DIO models
DOStatus short Return/set the status for the specific
DO channel which functions in “D/O
mode” (1=Active, 0=Inactive)
All DIO models
EventTriggerEnable boolean Enable/disable event trigger mode
(True=Enable, False=Disable)
All models
LastError short Return the Error code of operation All models
MoudleIDNo short Return the module ID number All models
ModuleIP string Set the remote module IP address All models
ModuelName string Return the module name All models
TCPTimeOut long Return/set the TCP/IP Timeout (ms) All models
UpdateTimeInterval long Return/set data update time
interval(ms)
All models
6.8 Methods of TCPDAQ ActiveX Control
Name Arguments Returned type Description
Open None None Open TCPDAQ.OCX to start operation (Must be
called before accessing properties at run time)
Close None None Close TCPDAQ.OCX(Must be called before
terminating the APP)
ModBusReadCoil short Startaddress
short Counts
short coildata[]
None Read coil data from remote module, and stored
into coildata[] buffer
Printed Date: 27 February 2018
60