EDAM-4200 Series User’s manual Version 1.03
8.4.58
~AA3P
Read module Power-on delay time
Description: Set module Power-on delay time
Command:
~AA3P [CHK](cr)
Syntax:
~
Command leading code
AA
Module address ID(01 to FF , Always 01)
3P
command for read module Power-on delay time
CHK
Check sum
(cr)
Carriage return
Response:
!AAPPP (cr)
Valid command.
?AA[CHK](cr)
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Module address ID
PPP
Power-on delay time(unit: 0.1sec) to start communication timeout.
(range hex 000~FFF)
CHK
Check sum
(cr)
Carriage return
Example 1:
Set power-on delay time to 096 (15 sec)
command: ~013096(cr)
response: !01(cr)
Example 2:
Read power-on delay time and return 096 (15 sec)
command: ~013P(cr)
response: !01096(cr)
Ref. command:
~AA3PPP
Printed Date: 27 February 2018
145