Inlog EDAM-4200 Series, User Manual, Page: 139 / 170

EDAM-4200 Series User’s manual Version 1.03
8.4.53
~AA2
Read host communication Timeout value
Description: Read host communication Timeout value
Command:
~AA2 [CHK](cr)
Syntax:
~ Command leading code
AA Module address ID (01 to FF , Always 01)
2 command for reading watchdog timeout value
CHK Check sum
(cr) Carriage return
Response:
!AAEVVV (cr) Valid command.
?AA[CHK](cr) Invalid command
! Delimiter for valid command
? Delimiter for invalid command
AA Module address ID
E
Host watchdog enabled status
= 1 – Enable.
= 0 – Disable.
VVV Timeout value in hex format from hex 001 to 28F .(unit 0.1 sec),
FF denotes 25.5 seconds
CHK Check sum
(cr) Carriage return
Example : Reads the host watchdog timeout value of module 01 and returns FF, which denotes that the
host watchdog is enabled and the host watchdog timeout value is 25.5 seconds.
command:
~012(cr)
response:
!011FF(cr)
Ref. command: ~**, ~AA1, ~AA0, ~AA4V, ~AA5V, ~AA3EVVV, ~AA3PPP , ~AA3P
Printed Date: 27 February 2018
139