EDAM-4200 Series User’s manual Version 1.03
8.4.44
$AA0MCC(data1)(data2)
Set DI counter debounce time
Description: Set DI counter pre-debounce and post-debounce of channel N (unit = 0.5ms)
Command:
$AA0MCC(data1)(data2) [CHK](cr)
Syntax:
$
Command leading code
AA
Module address ID (01 to FF , Always 01)
0M
command for read DI counter filter of channel N
CC
Represents DI channel number (00~0F)
(data1)
DI counter pre-debounce (Min. Low width) time, 8-chars, (unit=0.5ms)
(data2)
DI counter post-debounce(Min. High width) time, 8-chars, (unit=0.5ms)
CHK
Check sum
(cr)
Carriage return
Response:
!AA (cr)
Valid command.
?AA[CHK](cr)
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Module address ID
CHK
Check sum
(cr)
Carriage return
Example:
Set DI counter channel(0) pre-debounce time to
00000002
(=1 ms) and
post-debounce time to
00000003
(=1.5 ms)
command:
$010M
0000000002
00000003
(cr)
response:
!01(cr)
Ref. command:
$AA0MCC, $AAECN
Printed Date: 27 February 2018
130