Page 9 of 13
Installing the Trays
Remove all cartridges from the printer.
Remove the Left and the Right ink covers
(the plastic covers over the cartridge
area). Each cover is held by 2 brackets.
It is enough to remove one of the
brackets to be able to take the covers
off. We won’t use them unless you decide
to switch back to one-time cartridges.
Trays are equipped with hooks that allow
them to be hung on the side of the
Colorpainter.
Hang the trays on both sides of your
printer.
Orient the bottles so that the fitting
would be turned towards the printer wall.
This way the ink lines won’t be on your
way when filling the bottles with ink.
When you are going to pull one of the bottles
out of the tray, you must hold down the other
bottle(s) or otherwise you may lift the whole
tray and the hooks may slide off the printer
causing the tray to fall.
Summary of Contents for Pro-CP2
Page 4: ...Page 4 of 13...
