Page 8 of 13
Finally, connect the 2-pin connector at the end of this cable, to the 2-pin connector of the
Electronic Device.
Now you can close all covers and
mount the Electronic Control Devices
on the sides of the covers as shown
on this picture. You may want to
mount it higher or lower to your
preference.
Use Velcro strips on the back of the
device. Arrange the ribbon cable like
shown on this picture. You may want
to use pieces of double-sided
adhesive tape to organize it.
Summary of Contents for Pro-CP2
Page 4: ...Page 4 of 13...
