WEB Configuration Manual
- 4 -
Chapter 2 Accessing Switch
2.1 Accessing the Switch Through Web
When accessing the switch through Web browser, please make sure that the applied browser
complies with the following requirements:
⚫
HTML of version 4.0
⚫
HTTP of version 1.1
⚫
JavaScript
TM
of version 1.5
What's more, please ensure that the main program file, which is running on the switch, supports
Web access and your computer has already connected to the network which the switch is located.
2.2 Initially Accessing the Switch
When the switch is initially used, you can use the Web access without any extra settings:
1. Modify the IP address of the network adapter and subnet mask of your computer to
192.168.2.2
and
255.255.255.0
respectively.
2. Open the Web browser and enter
192.168.2.1
in the address bar. It is noted that
192.168.2.1
is the default management address of the switch.
3. If the IE browser is used, please enter the username and the password in the ID
authentication dialog box. Both the original username and the password are “admin”,
which is capital sensitive.
4. After successful authentication, the systematic information about the switch will
appear on the IE browser.
