45
Enable Debug
Enable debug mode.
Disable
Expert
Option
(not
recommended)
Set expert option, not recommended
N/A
3.6.5 PPTP Client
From navigation tree, select VPN>>PPTP Client, enter "PPTP Client" and click <add>.
Table 3-6-5 Parameters of PPTP Client
4 PPTP Client
Function description: Configure parameters of PPTP client.
Parameters
Description
Default
Enable
Click to enable PPTP client
Disable
Tunnel Name
User defines tunnel name
PPTP_tun
nel_1
PPTP Server
Set PPTP Server address
N/A
Username
Set username of PPTP server
N/A
Password
Set password of PPTP server
N/A
Startup Modes
Select Auto Activated/Triggered by
Data/Passive/Manually Activated
Auto
Activated
Authentication method
Select Auto/CHAP/PAP/MS-CHAPv1/MS-CHAPv2
Auto
Local IP Address
Set local IP address
N/A
Remote IP Address
Set remote IP address
N/A
Remote Subnet
Set remote subnet address
N/A
Remote Netmask
Set remote subnet mask
255. 255.
255. 0
Link Detection Interval
Set link detection interval
60 s
Max. Retries for Link
Detection
Set the max. number of retries
5
Enable NAT
Click to enable NAT
Disable
Enable MPPE
Click to enable MPPE
Disable
Enable MPPC
Click to enable MPPC
Disable
MTU
Set max. transmission unit
1500
MRU
Set max. receiving unit
1500
Enable Debug
Enable debug mode.
Disable
Set expert option (not
recommended)
Set expert option, not recommended
N/A
3.6.6 OpenVPN
Single point participating in the establishment of VPN is allowed to carry out ID verification by
