13
Parameters
Description
Default
Enable
Enable PPP dialup.
Enable
Time Schedule
Set time schedule
ALL
Shared
connection
(NAT)
Enable—Local device connected to Router
can access to the Internet via Router.
Disable—Local device connected to Router
cannot access to the Internet via Router.
Enable
Default Route
Enable default route
Enable
Network Provider (ISP)
For selecting network provider providing
service at present
Custom
APN (inapplicable to
CDMA2000 series)
Mobile carrier provides relevant parameters
(subject to local carrier)
cmnet/uninet
Dialing Number
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“*99#”“*99***1#”
(China
Mobile,
China
Unicom)#777(Chin
a Telecom)
Username
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs”
(China
Mobile,
China
Unicom)
CARD(China
Telecom)
Password
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs”
(China
Mobile,
China
Unicom)
CARD(China
Telecom)
Network Type
Auto, 2G Only, 3G Only, 4G Only
Auto
Connection Mode
Optional always online, dial on demand,
manual dialing
Always Online
Redial Interval
Set the redialing time when login fails.
30 s
Show Advanced Options
Initial Commands
Set initial commands
AT
PIN Code
For setting PIN code
N/A
MTU
Set max. transmission unit
1500
Authentication method
Optional: Auto, PAP, CHAP
Auto
Use Peer DNS
Click to receive peer DNS assigned by the
mobile carrier
Enable
Link detection interval
Set link detection interval
55 s
Debug
Enable debug mode
Disable
Debug Modem
Enable debug modem
Disable
ICMP Detection Mode
Ignore Traffic/ Monitor Traffic
Ignore Traffic
ICMP Detection Server
Set the ICMP Detection Server. N/A N/A
