InGateway Documentation, Release 0.0.1
–
Export: allows you to export an app configuration file.
–
Import: allows you to import an app configuration file. After you import a configuration file and
restart the app, the app runs with the imported configuration file.
–
Unload: allows you to unload an app.
–
Add: allows you to add an app.
3.5 System
3.5.1 System Time
To enable the IG501 to cooperate with other devices properly, you may need to set an accurate system time
for it. For this purpose, set the system time on the
System Time
page and enable the NTP protocol to
implement clock synchronization among all clock-supporting devices on the network. In this way, all devices
maintain the same clock to provide applications based on the consistent time. Follow these steps to set the
system time:
• Method 1: Select a time zone.
1. Choose
System > System Time
to display the
System Time
page.
2. Select the time zone where the IG501 is located from the
Time Zone
drop-down list.
3. Click
Apply
.
• Method 2: Set the system time manually.
1. Choose
System > System Time
to display the
System Time
page.
2. Set a specific time in the Set Time field.
3. Click
Apply
.
• Method 3: Use the local time of the PC.
1. Choose
System > System Time
to display the
System Time
page.
2. The IG501 can obtain the time of the PC as its local time.
3. Click
Sync
next to the Device Time field.
• Method 4: Enable SNTP clients.
1. Choose
System > System Time
to display the
System Time
page.
2. Select
Enable SNTP Clients
.
3. Set the parameters. For details about these parameters, see
SNTP client parameter description.
4. Click
Submit
to apply the configuration.
Follow these steps to enable the NTP server to synchronize time to other devices.
178
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
