InGateway Documentation, Release 0.0.1
Parameters of a static route are described as follows:
• Destination: specifies the destination IP address to which packets are sent.
• Netmask: specifies the subnet mask of the destination IP address.
• Interface: specifies the interface through which data packets are forwarded to the destination network.
• Gateway: specifies the IP address of the next router that data packets pass through before reaching
the destination IP address.
• Distance: specifies the priority of the route. A smaller value indicates a higher priority.
• Track ID: specifies the track index or ID.
3.3.4 Firewall
3.3.4.1 ACL
An access control list (ACL) permits or denies specified data flows (such as the data flow from a specified
source IP address or account) based on a series of matching rules to filter the data reaching a network inter-
face. You can configure a data filtering policy for a network interface on the
ACL
page. The configuration
procedure is as follows:
1. Choose
Network > Firewall > ACL
to display the
ACL
page.
170
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
