2.3.2
Dynamic
IP
address
setting
To configure one or two ports to request IP addresses dynamically, please use the dhcp option instead of
the static option in the iface command, as shown below.
2 .4
System
Management
2 4 1
Time
setting
There are two kind of time of EC900 that can be set. One is the system time, the other is the RTC
(RealTime Clock) time saved by the EC900 hardware. Use the date command to query the current
system time or set a new time. Use the hwclock command to query the current RTC time or set a new
RTC time.
Use
date MMDDhhmmYYYY
command to set system time.
MM = Month
DD = Day
hhmm = Hour, minute. For example.
Plain Text
copy
1
2
date
sudo date 112515192021
