Inglesina Zippy Evo, Nstruction Manual

Page: 30 / 100

30
EN
FEEDING BOTTLE HOLDING UNIT (IF AVAILABLE)
fig. 21
Hook the feeding bottle holding unit ( T9 ) to the
GSBNFBOENBLFTVSFJUJTQSPQFSMZJOJUTTFBU
STORAGE BASKET
fig. 22
The frame is equipped with a capacious storage
basket ( T8 ). To secure it, insert all buttonholes in the proper
hooks and button up the rear strips.
ADDITIONAL TRANSPORT UNITS TO THE FRAME (CARRY
COT, TRANSPORT SEAT, AND INFANT CAR SEAT)
fig. 23
5IF GSBNF DBO CF VTFE UPHFUIFS XJUI DBSSZ DPU
USBOTQPSUTFBUBOE)VHHZJOGBOUDBSTFBU
ZIPPY CARRY COT
HOOKING OF THE CARRY COT TO THE FRAME
#FGPSF IPPLJOH UIF DBSSZ DPU JU JT OFDFTTBSZ UP QSPDFFE BT
follows:
fig. 24 Remove the armrest covers ( T3 ) if available,
CZ QSFTTJOH XJUI UIF JOEFY öOHFS UIF IPPLJOH MFWFS
F9 )
positioned inside the armrest ( F10 ).
fig. 25 Insert the two stabilizing supports ( T7 ) in the
openings ( F11 ).
WARNING: the stabilizing supports have to be inserted
only when using the frame with the carry cot.
fig. 26
#ZIPMEJOHUIFDBSSZDPUCZUIFIBOEMFBUUBDIJUUP
the armrests ( F10 QPTJUJPOJOHJUFYDMVTJWFMZGBDJOHNVN
fig. 27 WARNING: make sure that the carry cot is always
properly attached on both sides of the frame before use.
UNHOOKING OF THE CARRY COT FROM THE FRAME
fig. 28
Act on the lever ( B1
QPTJUJPOFE FYUFSOBMMZ UP UIF
DBSSZDPU
fig. 29 4JNVMUBOFPVTMZ MJGU UIF DBSSZ DPU CZ IPMEJOH JU CZ
the handle.
HOOKING OF THE HOOD
fig. 30
)PPLUIFQSFTTTUVETPOUIFDBSSZDPUTUSVDUVSF
fig. 31 Wrap the hood ( C2 ) around the handle fastening it
using the suitable press studs.
HANDLE AND HOOD ADJUSTMENT
fig. 32
5PBEKVTUUIFIBOEMFBOEUIFIPPEBDUPOUIFUXP
lateral button ( B2 TJNVMUBOFPVTMZ
fig. 33 WARNING: to transport the carry cot, always
hold it by the handle.
HOOKING OF THE BLANKET
fig. 34
)PPLBMMCVUUPOTPGUIFCMBOLFUUPUIFDBSSZDPU
MAINTENANCE OF THE INTERNAL LINING
fig. 35
It is recommended to remove the internal lining
QFSJPEJDBMMZUPQSPWJEFGPSJUTDPSSFDUNBJOUFOBODF
HUGGY INFANT CAR SEAT
HOOKING OF THE INFANT CAR SEAT TO THE FRAME
#FGPSFIPPLJOHUIFJOGBOUDBSTFBUUPUIFGSBNFJUJTOFDFTTBSZ
to proceed as follows:
fig. 36 If present, remove the stabilizing supports ( T7
CZ
acting on the proper push-buttons ( F12 ).
WARNING: hold the supports during the ejection.
fig. 37
Remove the armrest covers ( T3 ) if available,
CZ QSFTTJOH XJUI UIF JOEFY öOHFS UIF IPPLJOH MFWFS F9 )
positioned inside the armrest ( F10 ).
fig. 38 #Z IPMEJOH UIF JOGBOU DBS TFBU CZ UIF IBOEMF
attach it to the frame on the armrests ( F10 ), positioning it
FYDMVTJWFMZGBDJOHNVN
fig. 39 WARNING: make sure that the infant car seat is
always properly hooked before use.
UNHOOKING OF THE INFANT CAR SEAT FROM THE
FRAME
fig. 40
Act on the lever ( U1 ) positioned on the rear side of
the infant car seat.
fig. 41 4JNVMUBOFPVTMZMJGUUIFJOGBOUDBSTFBUCZIPMEJOHJU
CZUIFIBOEMF
5P VTF UIF )VHHZ JOGBOU DBS TFBU QSPQFSMZ SFGFS UP UIF
dedicated manual.
TRANSPORT SEAT
HOOKING OF THE TRANSPORT SEAT TO THE FRAME
Before hooking the transport seat to the frame:
fig. 42 If present, remove the stabilizing supports ( T7 CZ
acting on the proper push-buttons ( F12 ).
WARNING: hold the supports during the ejection.
fig. 43
Insert the armrest covers ( T3 ) in the proper seats.
WARNING: when placing the baby, make always sure that
the armrest covers are properly fitted in their seats.
fig. 44
The transport seat is reversible; therefore, it can be
hooked to the frame facing mum or the street.
fig. 45 Hook the transport seat to the frame positioning
it in the proper seats on both sides, following the graphical
references available on the structure.
fig. 46 WARNING: make sure that the transport seat is
always properly hooked on both sides before use.
UNHOOKING OF THE TRANSPORT SEAT FROM THE FRAME
fig. 47
Press the lever ( S1 ) and lift one side of the transport
TFBUCZNPWJOHJUTMJHIUMZJOXBSET3FQFBUUIJTQSPDFEVSFPO
UIFPQQPTJUFTJEFSFNPWJOHJUDPNQMFUFMZ
WARNING: never perform this procedure with baby on
board.
ADJUSTMENT OF THE BACKREST
fig. 48
*UJTQPTTJCMFUPBEKVTUUIFCBDLSFTUUPQPTJUJPOT
act on the central device ( S2 ) and bring the backrest to the
wished position.
USE OF THE BUMPER BAR
TRANSPORT SEAT FACING MUM
fig. 49
When the transport seat is facing mum, use the
small handrail ( R1 ) together with its covering.
fig. 50 To hook it, press the levers ( S3 ).
fig. 51 Insert the ends of the handrail in their proper seats
( S4 ) on the transport seat.
fig. 52 The handrail can be opened on one side or
DPNQMFUFMZ SFNPWFE 5P PQFO JU QSFTT UIF MFWFS
S3 ) and
FYUSBDU JU UP SFNPWF JU SFQFBU UIF QSPDFEVSF BMTP PO UIF
other side.
TRANSPORT SEAT FACING THE STREET
fig. 53
When the transport seat is facing the street, use the
big handrail ( T4 ) together with its covering.
fig. 54 To hook it, insert the ends in the openings on the
BSNSFTUTBOEQSFTTUIFNVOUJMUIFZCMPDL
fig. 55 The handrail can be opened on one side or
DPNQMFUFMZ SFNPWFE 5P PQFO JU QSFTT UIF SFE MFWFS
S3 )
present under the armrest ( F10 ); to remove it, repeat the
procedure also on the other side.
WARNING: do not insert the fingers in the openings on
the armrests when performing these procedures.
INSTRUCTIONS