INGICS
TECHNOLOGY
SIM
To use iGS03M (LTE-M Model), you have to put a Cat-M1 micro
SIM card into the socket of iGS03M. Please open the bottom cover to
insert the SIM card. The steps to open the bottom cover are as below,
WiFi
The 2.4G WiFi AP connection is used to configure the unit through web UI. iGS03 works as an
WiFi Access Point(AP) supporting DHCP. Users must connect to this AP to configure the unit.
BLE
The BLE subsystem operates in listening mode. It collects the messages advertised by BLE
devices. These messages are then sent to the cloud server configured by the user.
iGS03 supports two BLE modes
1.
LE 1M PHY: including BLE4.2(Legacy)/BLE5, 1M in 100% duty cycle
2.
LE Coded PHY: BLE5, 125K( long range) in 100% duty cycle
Step 1. Remove external BLE antenna
Step 2. Remove the screw from bottom cover
Step 3. Use finger to press and hold the arrow
part
Step 4. Pull out the bottom cover
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
4
