INGICS
TECHNOLOGY
Station Mode
This mode is used for transferring
data by *WiFi.
Scan: Click it to scan available APs.
The scan result list will be displayed
on the popup window, and the user
can choose the correct AP from the
list.
SSID: No manual input required. It is automatically filled once a user chooses an AP from
the scan result list.
Security: Basically it is automatically detected and selected after choosing an AP from the
scan list. But in case the AP setting is in WEP open or WEP shared, the user has to
confirm it by himself/herself.
Password: Type the one assigned in your AP.
*Note: In data transfer, by default, WiFi has higher priority than LTE. So for iGS03M if both
interfaces are configured correctly and connected, the data will be transferred by WiFi.
Users can change the priority through the Telnet command.
Network
WiFi Address
This setting is for configuring in WiFi
Station mode. Normally the “DHCP
Client” is used to join a WiFi AP w/
DHCP. If one wants to manually assign
an IP address for iGS03, choose “Static
IP” to to assign the IP Address,
Netmask, Gateway, and/or DNS
servers.
DHCP Server (WiFi AP)
The default IP address of iGS03 in WiFi AP mode is 192.168.10.1 and the netmask is
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
10
