INGICS
TECHNOLOGY
This setting is mainly for Station mode.
Normally a DHCP client is enabled to join
a WiFi AP w/ DHCP. If one wants to
manually assign an IP address for
iGS01S, the DHCP client should be
disabled. Once disabled, users should
assign the IP, Netmask, Gateway, and/or
DNS server.
AP Server Setting
This setting is for AP mode. The default
IP address of iGS01S in AP mode is
192.168.10.1 and the netmask is
255.255.255.0. In case the user wants to
change the IP address in AP mode, just
set the IP and Netmask here. The
corresponding DHCP client address will
be changed too. For example, if the DHCP
server IP address is changed to
192.168.0.1, the DHCP clients associated
with iGS01S AP will be 192.168.0.X.
Applications
M2M TCP Server
iGS01S is a TCP server with a fixed IP
address 192.168.10.1. The default port is
8080 and users can also assign the port.
M2M TCP Client
If there is already a TCP server, one can
set iGS01S as a TCP client to
communicate with the server. Enter the
address and port number of the TCP
server to connect them.
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
6
