INGICS
TECHNOLOGY
Web User Interface
Wi-Fi
iGS01S can work in Simple AP mode and
Station mode. These modes and the related settings
can be managed on this page.
Simple AP
SSID: The default name is BLE-WiFi
plus the last digits of the mac address.
It’s configurable by user.
Security Protocol: Open, WPA TKIP,
WPA AES, WPA2 TKIP, WPA2 AES are
supported. WPA2 AES is recommended.
Security Key: 8-63 characters can be
input
Channel: 1~11(ch12 and ch13 could be
supported by request)
Station
Scan: Click it to scan available APs.
Site Survey: The scan result is listed
here and users can choose the correct
AP from the list. The WiFi channel of the
AP is also listed.
SSID: No manual input required. It is automatically filled once a user chooses an AP from
the scan list.
Security Protocol: Basically it is automatically detected and selected after choosing an AP
from the scan list. But in case the AP setting is in WEP open or WEP shared, the user has
to confirm it by himself.
Security Key: Type the one assigned in your AP.
Network
AP Client Setting
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
5
