Ingeteam INGECON SUN 1000TL U B360, Installation And Operation Manual

Page: 88 / 180

ABK2027IQE01_A - Installation and Operation Manual
12.2. Ethernet communication
The inverters include standard hardware to communicate via Ethernet, located on the side of the upper assembly
panel of the DCAC connections module.
Due to this hardware you can connect one or various inverters to your computer. The following diagram shows the
connection of one or more units to a computer via Ethernet.
1
Inverter connection
INFO
For plant control, connect via port A. If the monitoring kit for DC input currents is installed, the communications
for said kit shall be connected via port B.
To make the connection of various inverters you must install a switch. Ingeteam offers the optional switch by order
upon the delivery of the unit.
1 2 3 4
Wiring to do by installer between inverters
Inverter internal wiring
Connection of several inverters
88
Connection of the communication accessories Ingeteam