Ingeteam INGECON SUN 1000TL U B360, Installation And Operation Manual

Page: 53 / 180

ABK2027IQE01_A - Installation and Operation Manual
Siba
Fuse holder base
size
Fuse size Rated current Rated voltage
Without an indicator
With indicator
and adapter for
microswitch
20 028 28.50 20 028 29.50
2XL, 3L
NH1XL
50 A
1100 VDC
20 028 28.63 20 028 29.63 63 A
20 028 28.80 20 028 29.80 80 A
20 028 28,100 20 028 29,100 100 A
20 028 28,125 20 028 29,125 125 A
20 028 28,150 20 028 29,150 150 A
20 028 28,160 20 028 29,160 160 A
20 028 28,175 20 028 29,175 175 A
20 028 28,200 20 028 29,200 200 A
20 031 28,200 20 031 29,200
NH3L
200 A
20 031 28,250 20 031 29,250 250 A
20 031 28,315 20 031 29,315 315 A
20 031 28,350 20 031 29,350 350 A
20 031 28,400 20 031 29,400 400 A
Mersen Fuse holder base size Fuse size Rated current Rated voltage
HP12NH2XLGPV200
2XL, 3L 2
200 A
1000 VDC
HP12NH2XLGPV250 250 A
HP12NH3LGPV250
3L 3
250 A
HP12NH3LGPV350 350 A
HP12NH3LGPV400 400 A
6.8. Requirements for transformers
6.8.1. Grid connection transformer
CAUTION
These units must be connected to a transformer with the neutral of the low-voltage side isolated, thus
generating an IT grid.
This section lists the technical specifications of the grid connection transformer which converts the medium or
high supply voltage to the operating voltage of the unit.
1. The transformer’s power must be greater than the sum of the power ratings of the connected inverters,
keeping in mind the locations environmental conditions and height.
53
Preparation for installing the unit Ingeteam