11
Equipment transport
Ingeteam
ABA2013IQM01_ - Installation and usage manual
EN
IT
5. Equipment transport
The unit must be protected, during transport, from mechanical knocks, vibrations, water splashes (rain) and any
other product or situation which may damage it or alter its behaviour. Failure to observe these instructions may
lead to loss of warranty on the product, for which Ingeteam is not responsible.
5.1. Transport
Transport of the unpackaged unit
At least the following requirements should be observed:
1.
Follow the necessary ergonomic advice for lifting weights.
2.
Do not release the unit until it is perfectly secured or placed.
3.
Ask someone else to guide the movements to be made.
5.2. Unpacking
Correct handling of the units is vitally important in order to:
•
Prevent damage to the packaging which enables them to be kept in optimum condition from shipping
until they are installed.
•
Prevent the unit from receiving impacts and/or falling, which could deteriorate its mechanical features.
•
Avoid, as far as possible, vibrations which may cause subsequent malfunction.
If you observe any anomaly, please contact Ingeteam immediately.
Separating the packaging
All the packaging can be delivered to a non-hazardous waste management company.
In any event, each part of the packaging may be recycled as follows:
•
Plastic (polystyrene, bag and bubble wrap): the appropriate container.
•
Cardboard: the appropriate container.
