Pre-Installation
AFDJ-SVU01D-EN
37
Figure 39.
Front view of Common Mode Choke (with detailed hardware connection diagrams)
NOTE:
Common Mode Choke and mounting area may differ slightly
based on amperage/voltage ratings.
M12 Torque Requirements
Torque (N·m)
Torque (lb·ft)
50
37
Common Mode Choke
Cable Lug
Flat Washer
Lock Washer
(M12) Nut
Flat Washer
(M12) Bolt
Cable Termination
Lug Pad
Figure A – Front Perspective Shown Above
Figure B – Left Perspective with Section Cut Shown Below
Unexploded View
Exploded View
(M12) Nut
Lock Washer
Flat Washer
In locked position, channel nut teeth
are engaged to the sill channel.
(M12) Channel Nut
(Locked Position)
(M12) Bolt
(M12) Channel Nut
(Unlocked Position)
Sill Channel
Assembly
Common Mode Choke
Base Plate
Floor Plate
Two Layers of
Rubber Gasket
Sill Channel Assembly
See Figure B
See Figure A
