70
TK 56171-2-OP-EN
If the Pretrip Test results are CHECK or FAIL, the problem should be
diagnosed and corrected by a Thermo King service technician before the unit
is released for service.
To return to the Main Menu, press the EXIT Key. To return to the Standard
display press the EXIT Key again.
See summary of “Performing a Pretrip Test” displays () and ().
Flash Drive
If a properly configured USB Flash Drive is currently connected to the USB
Port on the unit Control Panel, the Flash Drive Menu will appear as a Main
Menu selection. If a properly configured USB Flash Drive is connected to the
USB Flash Drive connector, this feature allows the operator to select the
desired Flash Drive function. If enabled when the Flash Drive was
configured, the following functions may be available:
Download
•
Download the ServiceWatch Data Logger
•
Download the CargoWatch Data Logger
Flashload
•
Flash load Base Controller Software
•
Flash load HMI Control Panel Software
Flash Drive Icon
•
The USB Icon (
) will
appear in the upper left corner of the
display as shown below when a USB Flash
Drive is inserted in the USB Flash Drive
USB Port on the Unit Control Panel.
•
The USB Icon will also appear if a
computer is connected to the USB PC
USB Port on the Unit Control Panel or
inside the control box.
