Ingersoll-Rand Schlage AMGtime G Series, User Manual

Page: 56 / 119

Command Menu Reference: Setup Menu
48
GT-400 Terminal User’s Guide
Set Time&Attend
Set Time&Attend is used to enable or disable
time and attendance mode for the terminal. When
enabled, the user will be prompted to punch in or
out before the hand verification. When disabled,
the user will not be given the choice to punch in or
out and the terminal or host will automatically
punch the user in or out. The display of this menu
will indicate the current state of the Time and
Attendance Mode option. If it is disabled, press
Enable to enable Time and Attendance Mode. If it
is enabled, press Disable to disable it. Default: Disabled
Ran g e: none
Dependencie s : none
Who: A site administrator should set this
option during initial setup of the
terminal.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press General Setup.
4 Press Time&Attend.
5 Press Enable/Disable.
Set Terminal Time
Set Terminal Time is used to set the time on a
terminal running in demo mode. Otherwise, the
terminal will acquire the time from the host
application. Using the keypad, enter the date
according to the following format: hh mm ss. This
time should be set on a 24-hour clock. Default: none
Ran g e: none
Dependencie s : none
Who: A site administrator should set the
time of a terminal running in demo
mode during initial terminal setup.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Setup Menu.
3 Press General Setup.
4 Press Set Terminal Time.
5 Enter the current time.
6 Press Enter.