Ingersoll-Rand Schlage AMGtime G Series, User Manual, Page: 35 / 119

27
GT-400 Terminal User’s Guide Terminal Setup: Network Mode Configuration
Verifying Synchronization
There are a number of ways to quickly verify that your terminal is synchronizing with the host
application.
Check the Terminal Status in the Terminal Command Menus
1 Press Maintenance Menu.
2 Press Terminal Status.
See “Terminal Status” on page 88 for more information.
3 Scroll down until you can view DBSync Status. It should read ‘DBSync Completed’.
Change the Ready Screen Message
From the host application:
1 Change the ready string for the terminal
2 Run Sync Now
At the terminal:
1 View the LCD and verify the ready string has changed
Check the RSITerm.log File From a Telnet Session
1 Start a telnet session with the terminal.
See “Telnet” on page 95 for more information.
2 Type
cd /RecogSys/ZODB
and press Enter.
3 Type
cat RSITerm.log
and press Enter.