Ingersoll-Rand RX-264H, Operation & Maintenance Manual

Page: 26 / 288

RX-264H/RX-344H Upright Rammer
18-EN Operation & Maintenance Manual
GENERAL
Ingersoll Rand, through its distributors, warrants to the initial
user that each upright rammer RX-264H and RX-344H, will be
free of defects in material and workmanship for a period of
twelve (12) months from shipment to the initial user.
In the event of a manufacturing defect or incorrect assembly,
return the upright rammer to your Ingersoll Rand distributor.
Ingersoll Rand will provide a new part or repaired part, at its
election, in place of any part, which is found upon its inspection
to be defective in material or workmanship during the period
prescribed above.
Labour cost and/or transport cost to replace the part/unit is the
responsibility of the user. User must present proof of purchase
at the time of exercising warranty.
The above warranty does not apply to failures occurring as a
result of abuse, misuse, negligent repairs, corrosion, erosion
and normal wear and tear, alterations or modifications made to
the product without express written consent of Ingersoll Rand;
or failure to follow the recommended operating practices and
maintenance procedures as provided in the product's operating
and maintenance publications.
Accessories or equipment furnished by Ingersoll Rand, but
manufactured by others, including, but not limited to, engines,
shall carry whatever warranty the manufacturers have conveyed
to Ingersoll Rand and which can be passed on to the initial user.
IMPORTANT
This warranty is in lieu of all other warranties expressed or
implied, (except that of title), and there are no warranties of
merchantability or of fitness for a particular purpose. The
remedies of the initial user set forth herein are exclusive,
and the total cumulative liability of the Ingersoll-Rand not
exceed the purchase price of the unit upon which such
liability is based.
WARRANTY REGISTRATION
To initiate the machine warranty, fill out the “Warranty
Registration” form, supplied as part of the machine
documentation. The warranty will only be valid if the form is sent
to the address below during the 4 weeks (28 days) following the
purchase date.
Keep a copy for your records and mail the original to:
Ingersoll Rand Company LTD
Construction Technologies Division
501 Sanford Ave
Mocksville, North Carolina 27028
USA
or
Ingersoll Rand International
170/175 Lakeview Drive
Airside Industrial Park
Swords
Co Dublin
Ireland
Attention: Warranty Department Utility Equipment
NOTE: Completion of the following form validates the
warranty.