Ingersoll-Rand R132-160 kW, Product Information

Page: 21 / 144

Page 2: Counters
Figure 59: Counters
Hour Meters indicate the hours that: the controller has been powered up,
and the compressor has been running.
Starts indicate the number of times a start is attempted on the
compressor.
Date & Time
is adjustable and configurable in the GENERAL SETTINGS
folder.
NOTICE
All information on this page is read only .
Pages 3-5: Analog Inputs & Compressor Information
Figure 60: Analog Inputs & Compressor Information
Icon Meaning
Pressure
Temperature
NOTICE
All information on these pages is read only .
The following analog inputs are displayed in this section:
Package Discharge Pressure
Sump Pressure
Airend Discharge Temperature
Injected Coolant Temperature
Aftercooler Discharge Temperature
Separator Pressure Drop
Coolant Filter Pressure Drop
Inlet Vacuum
Remote Pressure (optional)
Aftercooler Discharge Pressure (integrated dryer compressors only)
•
•
•
•
•
•
•
•
•
•
•
•
•
Additionally, the following compressor status readings are included in this
section:
Motor Speed
Package kW
Average Package kW/hour
Average % Capacity
Average Capacity
Energy Cost
Energy Savings
Lifetime Energy Savings
Operator settings folder
Pages 1-2: Operator Settings
Figure 61: Operator Settings
The parameters below are adjustable at any time:
Table 22: Operator Settings
Operator
Settings
Default Min . Max . Step Unit
Target Pressure 100 65 145 1 psi
Automatic Stop
Pressure 110 1 10 1 psi
Immediate Stop
Pressure 120 Auto Auto+10 1 psi
% Savings
Compared To Modulation --- --- --- ---
Energy Rate 0.000 0.000 9999.999 --- ---
Reset Averaging --/--/-- - - - date
•
•
•
•
•
•
•
•

EN
EN- 80446339 Rev C
60313.16.03