Ingersoll-Rand IRN 10/7.5 kW Operation And Maintenance Manual Download Page 2

AIR COMPRESSOR GROUP

BONDED WARRANTY & REGISTERED START UP

Warranty

The Company warrants that the equipment manufactured by it and delivered hereunder will be free of defects in

material and workmanship for a period of twelve months from the date of placing the Equipment in operation or eighteen

months from the date of shipment from the factory, whichever shall first occur. The Purchaser shall be obligated to

promptly report any failure to conform to this warranty, in writing to the Company in said period, whereupon the

Company shall, at its option, correct such nonconformity, by suitable repair to such equipment or, furnish a replacement

part F.O.B. point of shipment, provided the Purchaser has stored, installed, maintained and operated such Equipment

in accordance with good industry practices and has complied with specific recommendations of the Company.

Accessories or equipment furnished by the Company, but manufactured by others, shall carry whatever warranty the

manufacturers have conveyed to the Company and which can be passed on to the Purchaser. The Company shall

not be liable for any repairs, replacements, or adjustments to the Equipment or any costs of labor performed by the
Purchaser or others without Company‘s prior written approval.

 

The effects of corrosion, erosion and normal wear and tear are specifically excluded. Performance warranties are

limited to those specifically stated within the Company‘s proposal. Unless responsibility for meeting such performance

warranties are limited to specified tests, the Company‘s obligation shall be to correct in the manner and for the period
of time provided above.
THE COMPANY MAKES NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER,

EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.
Correction by the Company of nonconformities whether patent or latent, in the manner and for the period of time

provided above, shall constitute fulfilment of all liabilities of the Company for such nonconformities whether based on
contract, warranty negligence, indemnity, strict liability or otherwise with respect to or arising out of such Equipment.
The purchaser shall not operate Equipment which is considered to be defective, without first notifying the Company
in writing of its intention to do so. Any such use of Equipment will be at Purchaser‘s sole risk and liability.

Note that this is Ingersoll

Rand standard warranty. Any warranty in force at the time of purchase of the compressor

or negotiated as part of the purchase order may take precedence over this warranty.

Register on

line at air.irco.com/registration.htm

Ingersoll

Rand 

Industrial Air Solutions

Swan Lane

Hindley Green

Wigan WN2 4EZ

Ingersoll Rand Asia Pacific

C/O Ingersoll

Rand South East Asia (Pte) Ltd. 

42 Benoi Road 

Singapore 629903 

Ingersoll

Rand 

Industrial Air Solutions

P.O. Box 1840

800

D Beaty Street

Davidson, NC 28036

Summary of Contents for IRN 10/7.5 kW






































Reviews: