Ingersoll-Rand Club Car VILLAGER 6 ELECTRIC, Operator'S Manual

Page: 48 / 88

Page 46
VILLAGER 6 ELECTRIC
Operators Manual
TPCC01BO00EN021 (Edition B)
DAILY PRE-OPERATIONAL SAFETY CHECKLIST
INSPECTION
AREA
INSPECTION CRITERIA
General
• Make sure that all parts are correctly installed.
• Make sure that all nuts, bolts, and screws are tight.
• Replace missing, worn, or damaged items.
Decals
• Make sure all safety, regulatory, and marketing decals are correctly
installed.
• Clean the decals with a soft moist cloth.
• Replace missing, worn, or damaged decals.
Tires
• Examine for wear and damage.
• Replace worn or damaged tires.
• Make sure that the tire pressure is correct.
Batteries
• Make sure that all battery hold-downs are tight.
• Make sure that the battery cables are correctly attached. Tighten as
necessary.
• Examine the battery posts for corrosion. If corrosion is found, remove the
corrosion.
• Make sure that the batteries are fully charged.
• Examine the battery acid level. Add deionized or distilled water as
necessary.
• Replace missing, worn, or damaged items.
Battery Charger
• Examine the electrical cords for cracks, loose connections, and frayed
wires.
• Examine receptacle contacts and plug terminals. Clean as necessary.
• Replace missing, worn, or damaged items.
• Make sure that the battery charger operates correctly.
Vehicle
Performance
Inspection
• Do a vehicle performance inspection.
VEHICLE PERFORMANCE INSPECTION
Before the vehicle performance inspection:
• Read and obey all safety decals and information located on the vehicle.
• Understand how to operate the vehicle correctly and safely.
7
Vehicle Operation
Daily Pre-Operational Safety And Performance Checks