background image

OPERATOR’S MANUAL 

RM072S-XXX-XX

INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.

INCLUDE MANUALS: S-635 General Information (pn 97999-635).

RELEASED: 12-14-12

REVISED: 10-27-17

(REV: D)

RM072S-XXX-XX

TWO POST LIFT / RAM

For use with 16 gallon / 60 liter drums (tapered or straight)

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

 (800) 495-0276 

 FAX (800) 892-6276 

© 2017 

CCN 46763785

arozone.com

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

 

y

Use only genuine ARO® replacement parts to assure compatible 

pressure rating and longest service life.

 

y

104217

 for repair of P39124-120 filter / regulator.

 

y

104453

 for repair of P39344-110 filter / regulator.

 

y

637466

 for repair of lift / ram seals.

SPECIFICATIONS

Model Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .  RM072S-XXX-XX

Maximum Working Pressure . . . . . . . . . . . . .   125 psig (8.6 bar)

Maximum Temperature Limits  . . . . . . . . . . .   10º F to 180º F (-12º C to 

82º C)

Base Dimensions . . . . . . . . . . . . . . . . . . . . . . . .   19-3/4” x 24” (501.7 mm 

x 609.6 mm)

Height (lowered) . . . . . . . . . . . . . . . . . . . . . . . .   43-37/64” (1106.6 mm)

(raised)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   73-27/64” (1864.8 mm)

Stroke  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   29-55/64” (758.2 mm)

Weight   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   160 lbs (71.5 kgs)

Noise Level @ 125 psig (continuous duty)   82.4 dB(A)

 The pump sound pressure levels published here have been updated to 

an Equivalent Continuous Sound Level (LA

eq

) to meet the intent of ANSI 

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

GENERAL DESCRIPTION

The ARO model RM072S-XXX-XX two post lift / ram uses two 3-1/4” 

air powered cylinders connected by a steel cross member and 

welded to a heavy gauge base plate. It is normally used to raise and 

lower a fluid handling pump and follower in and out of a standard 

16 gallon / 60 liter drum, or when used as a ram, it can force high 

viscosity flowable material into the pump inlet.

When properly secured (see “General Information - Air Operated 

Lifts and Rams”), this unit has the ability to raise a pump to clear a 

standard 16 gallon / 60 liter drum. The operator is then able to eas-

ily remove the pump from the drum.

This lift / ram uses a rotary 3-way control valve which controls the 

air necessary to raise and lower the lift / ram. This unit includes 

an auxiliary manual air valve which is used to supply a controlled 

amount of air pressure to the bottom of the follower plate. When 

the control valve is in the  “up” position, a small amount of air pres-

sure applied under the follower plate will help raise the follower 

plate, pump and lift / ram by relieving the vacuum (see page 3).

IMPORTANT

This is one of four documents which support the system. Re-

placement copies of these forms are available upon request.

  RM072S-XXX-XX Model Operator’s Manual (pn 97999-1707)

  S-635 General Information - Air Operated Lifts and Rams (pn 

97999-635)

  P391XX-XXX Piggyback Filter / Regulator Operator's Manual (pn 

100400-59)

  P393XX-XXX Piggyback Filter / Regulator Operator's Manual (pn 

100400-69

RM072S-XXX-XX Two Post Lift / Ram

Figure 1

Summary of Contents for ARO RM072S Series













Reviews: