OPERATOR’S MANUAL
650936
āā
–
ā
X
RELEASED: 8-30-96
REVISED: 6-9-10
(REV.
02)
TWO–BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
1.2:1 RATIO
6” STROKE
INCLUDE MANUALS: 66475-X LOWER PUMP END (PNĂ97999-111) &
FORM 3638-2 GENERAL INFORMATION MANUAL (PNĂ97999-353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
650936–
ā
X
CARBON STEEL
SERVICE KITS
•
Use only genuine ARO
R
replacement parts to assure compatible
pressure rating and longest service life.
•
637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shipped with the pump but it is included with each Service Kit. If this
Service/Parts Information is needed, request the Hydraulic Motor
Operator's Manual from ARO. (Manual 61588-100,
PNĂ97999-063).
•
637098-āX43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of -XXX options.
SPECIFICATIONS
Model Series
(Refer to option chart)
650936ā-āXX3
. .
Type
Hydraulically Operated, Two-Ball
. . . . . . . . . . . . . . . . . . . .
Ratio
1.2:1
. . . . . . . . . . . . . . . . . . . .
Hydraulic Motor
61588-100
. . . . . . . . . . . .
Motor Repair Kit
637164
. . . . . . . . . .
Motor Size
2.062 sq.'' (13.3 sq. cm)
. . . . . . . . . . . . . .
Stroke
6''
. . . . . . . . . . . . . . . . . .
Hydraulic Inlet
3/8'' - 18 NPTFā-ā1(f)
. . . . . . . . . . .
Hydraulic Return
1/2" - 14 NPTFā-ā1(f)
. . . . . . . . .
Lower Pump End Series
66475ā-āXX3
. . . . .
Lower Pump Repair Kit
637098ā-āX43
. . . .
Material Inlet
2'' 11-1/2 NPTF-1ā(f)
. . . . . . . . . . . . .
Material Outlet
1'' 11-1/2 NPTF-1ā(f)
. . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range
50 - 1200 PSI (3.4 - 83 bar)
Fluid Pressure Range
60 - 1472 PSI (4.1 - 102 bar)
. . . . . . .
Max. Rec'd Cycles / Minute
50
. . .
Displacement In
3
Per Cycle
20.683
. . .
Volume / Cycle
11.5 oz. (339 ml)
. . . . . . . . . . . .
Cycles Per Gallon
11.2
. . . . . . . . . .
Flow @ 50 Cycles / Minute
4.5 GPM (16.9 lpm)
. . .
Noise Level
N/A
. . . . . . . . . . . . . . .
PUMP DATA
Hydraulic Motor
61588–100
(See Manual 61588-100)
FIGURE 1
Material Outlet
1’’ NPTF–1(f)
175
_
FROM HYDRAULIC INLET
Lower Pump
66475–XX3
(See Manual 66475ā-āX)
Hydraulic Inlet
3/8–18 NPTF–1(f)
(Not Shown)
Spacer Section
48-3/32
(1222 mm)
16-3/32
(409 mm)
32-1/16
(815 mm)
Accessory Available: 61938-1 Wall Bracket and 65138 Floor Mounting Flange
.
CONNECTOR (See Figure 2)
MODEL 650936-XX3
CAP SCREW Y5-107-C (3)
WASHER Y14-625-C (3)
SPACER ROD 93346-1 (3)
Material Inlet
2’’ NPTF–1(female)
WASHER Y14-750-K (3)
CAP SCREW Y6-128-C (3)
MOUNTINGPLATE 93353-1
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
=
650936ā-āX MODEL OPERATOR'S MANUAL
-
GENERAL INFORMATION - INDUSTRIAL PISTON PUMPS
-
66475ā-āX LOWER PUMP END OPERATOR'S MANUAL
-
61588ā-ā100 HYDRAULIC MOTOR OPERATOR'S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99711996
