Model
4MUD4542A10N0A
4MUD4548A10N0A
in H2O
mm Aq
0.20
5.2
0100EC-1A194D-277D8C-370005
0100EC-1A1A81-278CA0-370005
0.30
7.5
0100EC-1A597E-277D8C-370005
0100EC-1A5AA2-278CA0-370005
0.40
10
0100EC-1A5AA1-277D8C-370005
0100EC-1A5AD4-278CA0-370005
0.50
12.5
0100EC-1A5AD3-277D8C-370005
0100EC-1A5E06-278CA0-370005
0.60
15
0100EC-1A5E06-277D8C-370005
0100EC-1A5E38-278CA0-370005
0.70
17.5
0100EC-1A5E38-277D8C-370005
0100EC-1A5E6A-278CA0-370005
0.80
20
0100EC-1A5E5A-277D8C-370005
0100EC-1A5E7D-278CA0-370005
27
Operation
Cleaning the Exterior
Use a dry or damp cloth to wipe the surface of the unit as needed. If necessary, use mild soap and
water on a damp cloth. Use a soft brush to remove dirt from the coil.
NOTICE
Avoid equipment damage and risk of fire!
Avoid using benzene or other flammable solvents. They may damage the surface of the unit
and increase the potential for fire.
Cleaning the Air Filter
1.
The air filter is accessible from the back of the unit. Remove it by sliding it to the right.
2. Clean the air filter with a vacuum or soft brush. If the dust is too thick, rinse them under running
water and dry in a well-ventilated area.
Note:
Drying the air filter in a confined or humid area may cause odors to develop. If odors
occur, re-clean and dry it in a well-ventilated area.
3. Slide the air filter back to its original position.
