Ingersoll-Rand 100-200, Operator'S Instruction Manual, Page: 21 / 93

19
NOTE - Use the UP and DOWN arrows to move between selections. Items will be highlighted in inverse display mode.
* - Selecting the highlighted item will display the corresponding menu.
** - Selecting the highlighted item will place the value in edit mode. This is indicated by only the value being displayed in inverse display mode.
*** - The UP and DOWN arrows will alter the value. Depressing “Cancel” will exit the edit mode and leave the value unchanged. Depressing
“Set” will save the new value and flash the value to indicate acceptance.
**** - Depressing “Cancel” will exit calibration mode. Depressing “Calibrate” will calibrate selected sensor.
***** - Use UP and DOWN arrows to scroll through list of status items.
INTELLISYS
Operator P
anel Flo
w Dia
gram
Figure 3.2.1
CURRENT STATUS
MAIN MENU*
OPERATOR
SETPOINTS**
OPTIONS**
SENSOR
CALIBRATION**
ALARM
HISTORY**
OPERATOR
SETPOINTS
ITEM***
OPTIONS
ITEM***
SENSOR
CALIBRATION
ITEM****
ALARM
HISTORY
ITEM*****
“Main Menu”
“Select”
“Select” “Select”
“Select”
“Main Menu”
“Main Menu”
“Main Menu”
“Main Menu”
“Main Menu”
“Main Menu”
“Status”
“Status”
“Status”
“Status”
“Status”
“Status”
“Status”
“Select”
“Cancel” or “Set” “Cancel” or “Set”
“Cancel” or “Set”
“Cancel” or “Calibrate”
CLOCK
FUNCTIONS
DATE AND
TIME
“Select”
“Main Menu”
“Main Menu”
“Status”
“Status”
“Cancel” or “set”
INTEGRAL
SEQUENCING
INTEGRAL
SEQUENCING
ITEM***
“Select”
“Main Menu”
“Main Menu”
“Status”
“Status”
“Cancel” or “set” “Alarm Hist.”
“Cancel ot Set”
“Cancel ot Set”