Ingenico iWL25 Series Operating Manual Download Page 18

Page: 18 / 132

SKYZER TECHNOLOGIES

PAGE 18 OF 132

INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE

Version 1.00

2.1.9

Communication Icon Status for GPRS and 3G

When GPRS communications is enabled, the status of the modem is displayed

on the top left hand side

Is displayed when terminal is powered-on to indicate GPRS

communications is supported.

As terminal attempts to register with the mobile communications

provider this icon is displayed.

When terminal registers with the network provider it will display this

icon.

In addition to the “GPRS” icons the network name of the mobile

communications provider is also displayed e.g. Vodafone

A GPRS signal strength indicator is also displayed.

Other GPRS conditions that may be displayed:

SIM card not detected.

SIM card locked and entry of code is required.

Summary of Contents for iWL25 Series





































































































































Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands

Ingenico iWL25 Series, Operating Manual

Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands