Ingenico iWL25 Series Operating Manual Download Page 117

Page: 117 / 132

SKYZER TECHNOLOGIES

PAGE 117 OF 132

INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE

Version 1.00

12.13.5

Settlement Cutover

This function allows the merchant to settle the current settlement period and to

cut over to a new settlement period. This can only be performed successfully

when the terminal is within the ‘settlement window’ defined by Paymark for the

particular merchant and terminal.

Step Terminal Display

Description

1.0

PAYMARK EFTPOS
1.EFTPOS MENU
2.HOSPITALITY MENU
3.ADMIN MENU
4.SUPERVISOR MENU

Press MENU key and then scroll through using down arrow key until ADMIN MENU

is shown on the display.
Press the corresponding number key or ENTER to access ADMIN menu.

2.0

ADMIN MENU
1.TOTAL
2.INQUIRY
3.CUTOCER

Press the corresponding number key or down arrow key to select CUT to perform a

settlement cutover.

3.0

1 Merchant 1
2 Merchant 2
3 Merchant 3

Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by

ENTER.

4.0

CUTOVER NOW?

ENTER=YES, CLR=NO

Press ENTER to initiate a settlement cutover or CLEAR to cancel and return to the

previous state.
NOTE: Terminal will prompt for any stored Tip Transactions and/or Electronic Offline

Voucher to be transmitted. Press ENTER to transmit or press CLEAR to proceed with

settlement cutover.

5.0

PROCESSING NOW

PROCESSING NOW will be displayed on the terminal while processing the

transaction.

6.0

TRANS. COMPLETE

Settlement cutover record is printed.

NOTE: Any expired stored Hospitality, EOV offline and/or Contactless

transactions, will be prompted to upload when Settlement Cutover is

performed. To upload these stored transactions at that time, press ENTER or

CLEAR to cancel upload and proceed with Settlement Cutover.

Summary of Contents for iWL25 Series





































































































































Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands

Ingenico iWL25 Series, Operating Manual

Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands