SKYZER TECHNOLOGIES
PAGE 55 OF 147
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
Version 1.00
6.0
NII?
018
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press
ENTER.
7.0
RKI
HOST IP ADDRESS
117.120.35.3
This parameter specifies the
RKI HOST IP ADDRESS
of Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host IP Address is set
as
117.120.35.3.
8.1
RKI
HOST IP ADDRESS
117.120.34.103
For third Party SIM card configuration, the RKI HOPST IP ADDRESS of Paymark
would be
117.120.34.103
. By default the RKI (PKMS) Host IP Address is set as
117.120.35.3.
8.0
RKI
HOST PORT
7540
This parameter specifies the
RKI HOST PORT
of the Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host Port is set as
7540.
9.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Press
CANCEL
to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
5.6.4
Remote Key Injection (PKMS) Initialisation
This function allows the Paymark security keys to be injected into the terminal
through the following steps below.
Step
Terminal Display
Description
1.0
Press
FUNC.
2.0
FUNCTION?
Key in
87
and press
ENTER
3.0
RKI PASSWORD?
Key in
6987
and press
ENTER
4.0
REMOTE INIT
IN PROGRESS
Terminal starts to download remote keys into the terminal from the Paymark host.
